Forum: Third Generation Magna TE - TW

Hi All, Got another video, this time for exhaust revision #2. Link: Exhaust Rev 2 It's a 2.5" cat back exhaust, with a 15" long hotdog resonator at the front, and an offset-straight-through berklee PEX muffler at the back. It cost $230 from Men at Work in Capalaba. Car is a 3.0 Auto.

Does anyone know what parts are needed to convert to climate control from standard??? Is it just the control unit that sits in the centre console and everything from the standard unit plugs into this, or is more needed like computer etc??? Any help appreciated.

Ok, so finding out I can do a 12 months interest free payment at most places for new rms, I've decided to bump ahead the schedual a bit and want to go get rims in the next couple of weeks. Now, what I want some opinions on, is dished wheels. As some of you already know, I've got a black verada,...

Finally saved enough coins to buy new shoes for my Solara and lowered her on King springs with Monroe GT Gas Reflex. Attached are the transformation photos... Took the car for a spin after the suspension done this morning. Definitely well worth the coins. No drama from speed bumps neither. :D

gday guys. I'm currently thinking about saving up for an upgade on the car front to a V6. The 2nd gen 4cyl just doesn't cut it. So i was thinking about getting a 3rd gen V6 over a 2nd gen,cos they are so closely priced and the 3rd gens look sooo much better. I'd also heard that there was a...

well put the beast on the dyno after getting a few things.. lost 10hp :rant: but thats caz i aint got the computer, so pete did a few things on the tune and i got 219.3HP at the wheels with some wheels spin not bad since the first run was 139hp haha it was running sooo rich haltec here...

Called up Mitsubishi today and asked them for prices for the following: Air Filter $36 + GST Fuel Filter $30 + GST Coolant 3L $33 + GST Power Steering Fluid 500ML $6 + GST

I am looking at finishing off the exhaust system. At current i only have pacemaker extractors and a super cat muffler on there. What sought of price would i be looking at to have a 2.5 mandrel bent piping? And should i also get a high flow cat? Any advise would be good. Ive been hearing about these...

2002 TJ VRX Manual KN Pod Filter 2 1/2" cat back system (Custom, extra loud!) Greddy Emanage RPW Quick Shifter Love my toy!

Ive had my magna for a while now. I should have done something about this crappy spoiler that was on the car when i bought it. Its some cheap plastice ricey looking thing that i want removed or replaced and fast. I was thinking of the spoiler off the talon kit. Probably fit where the other spoiler...

like to thank jason for these i first opened the box and was like ddddaaaaaammmmm these are HUGE gonna paint them tonight nice n red, get a retune of the car with a new power output and then install these tomorrow arvo https://i2.photobucket.com/albums/y5/mehhh/Calipers1.jpg...

About 4 months after i bought my TR 4 pot, complete with 185\75 r14, i decided i needed bigger rims, so i put a set of 225/55 r16 tyres, and 16x6.5 steel falcon rims. after i did this the car became very suseptible to the camber in the road, then when i recently fitted 235/45 r17 tyres and 17x7.5"...

I want to paint my calipers, but would like to sand it a bit first (just the surface). The stock calipers are rough and therefore collect alot of dirt (road & brake dust) on its surface in no time & will look terrible (the Brembo or Porsche calipers look great due to their fine surfaces). Will this...

Hey guys, i need some help. Yesterday i took my 2003 tj awd into autobarn to get them to take apart my center console so i could paint it(an air freshener leaked and stained the plastic) they did the job, i painted the console, they put it back in. but the stereo started playing without the...

Just bought some Philips H4 BlueVision 60/55W Globes for my TL. Yes i have read the headlamp faq. My question is does anybody have these on their tl and what are they like. also do the park globes that come with it fit into the TL. And whats the preqautions for installation. Not to touch the globe...